ABOUT INTEMOTION
| Intemotion technology wuxi Co., LTD. Address: Building 21, Kunding Future Wisdom Park, No. 216 Xitai Road, Xinwu District, Wuxi City Tel: 0510-85388538 Fax: 0510-81193066 Zip code: 214112 Website: www.intemotion.cn E-mail：sales@intemotion.cn |
Now: Home >>
Main technique
| Number | Technical product | Main uses and technical features |
|---|---|---|
| 1 | Vector control technology | Using phase current sampling and sampling of bus current and bus voltage, an adaptive mathematical model is established based on the physical relationship between current and rotor position to resolve the rotor position for proper drive. |
| 2 | No Hall high speed position decoding technology | A pure hardware circuit is used to analyze the relative relationship between the motor back EMF and the rotor position. The main chip drives the motor to operate correctly according to this logic. |
| 3 | Application of Transistor Amplification Zone in P-Channel Driving | By using the amplification characteristics of the triode, when driving different P-channel tubes, the driving current can be reasonably adjusted according to the emitter resistance of the triode. |
| 4 | Constant air volume control technology | It can automatically adjust the air supply volume according to the load change, keep the air volume constant within a certain range, without adding any sensing device. It is an advanced air volume control system. If the load drops, the system can reduce the air supply volume and meet the comfort needs. At the same time, it has a very significant energy saving effect. |
| 5 | Constant pressure control technology | The pressure of the pump system can be automatically adjusted according to the load change, and the water pressure can be kept constant within a certain range without adding any sensing device, and the pressure does not change with the change of the flow rate. |
| 6 | Zero power standby control system | In response to national environmental requirements, it uses a low-power, zero-power standby mode in standby mode. |
| 7 | Adaptive control technology | According to the actual needs of the system (for example: heat), the operating state of the system is automatically adjusted, the demand is increased, and the system immediately increases the corresponding (heat) demand. Conversely, the demand is reduced without adding any sensing device. |
